Best Metal Chop Saws Reviewed

COMPARISON, REVIEWS AND BUYER’S GUIDE 2019

A metal chop saw is an ideal machine or power tool that can really make your work a lot simpler if you have to cut a piece of metal.

A lot of people will try to do the job without one and find it to be very frustrating. A chop saw is so much easier to use than a grinder when you have to cut metal. In order to make sure that you get a good quality metal cutting chop saw you have to know what to look for.

When you are making a decision on which saw you should buy, you need to select the metal cutting chop saw since it is the best. In order for you to make the best choice that you won’t end up regretting, the following information has all the details of the best metal cutting chop saw thus it’s easy for you to make the right choice.

Best Premium Model

DEWALT Metal Cutting Saw, 14-Inch (DW872)

List Price: $462.08

Price: $461.16

You Save: $0.92

Price Disclaimer

Best Budget Model

HONEST BUYING GUIDES
Trusted by thousands of readers, even featured in

So what are the best Metal Chop Saws this 2019 you ask?

To Go Cold? Or To Go Abrasive?

The metal cutting chop saw is mainly of two various categories that are of best quality and does the work perfectly, the two categories are Abrasive saw and the second category is the Cold saw. When it comes to the first category the abrasive saw, it usually works like the grinder whereas on the other side cold saw works more than a saw like you would use to cut wood.

These two categories of saws each one of it has some benefits, in cold saw there are best in cutting clean and accurate cuts, they are best also since they don’t get hot while working and lastly they don’t produce a lot of sparks. On the other hand abrasive saw unlike the cold saw, you will be supposed to leave a little bit extra on the cut for grinding off.

Cold saw might also have some disadvantages since it’s a bit expensive as compared to abrasive saw.

Note

But how did we come up with this list? Well, here are the main factors and considerations that we based on.

Size

Size is a very crucial factor to consider when buying any power tool, the size of the tool makes it suitable for the purpose or the metal size you wish to cut. However, the normal selection option sometimes is dictated by the affordability and ability of you as a buyer to buy a given metal chop saw. Most often the price becomes high proportional to the size. Nevertheless, you can’t pick ineffective tool because the price is high and fail to meet the purpose intended.

Durability

The most important thing that you have to make sure of when you are choosing a metal cutting chop saw is to make sure that it is durable. That means that you want to get one that is heavy and well built.

Portability

There’re different types of miter saws including the Standard miter saw, Compound-miter saw, Dual compound miter saw, Sliding compound miter saw, and Laser/LED miter saws. Each type has its own pros and cons, and we’ve included models from the most popular, reliable and relevant miter saw types.

Power And Motor Performance

The other thing that a buyer would want to check is if there is enough power on the metal chop saw. Again cutting through metal is a difficult job so you require making sure that you have lots of power. At least, you are going to need a saw that has over fifteen amps. You also want to get a saw that has a motor which runs evenly. If your saw does not have sufficient power you would get blade deflection if you run into strong pieces and this will deter you from getting an exact cut.

Base Elevation

It is also important when you choose a metal chop saw to make sure that you look at the base of the saw to make sure that it has plenty of elevation. If it doesn’t you will end up hitting the ground or the table that you are working on when you complete your cut. A good quality saw should have a solid base that is high enough that the blade does not hit the ground when it is fully depressed.

Vise

We’ve considered user reviews and reviews from other experts so you only get miter saw models that have been proven to perform, high quality, reliable, durable and free from defects and design flaws.

Angles And Bevels

It is a good idea to make sure that the metal chop saw that you get can cut angles. Many of them don’t and for a lot of people, this is not a problem. However, you will have more flexibility if you get a saw that will allow you to cut angles.

Blade Quality

One thing that you may want to think about when you buy a metal chop saw is the blade that comes with it. Some companies will include a good quality blade but the vast majority just put in a cheap

Here Are the: "Top 5 Metal Chop Saws" You Can Find Today!

Various things are always considered while choosing most ideal metal chops saw. Few other things are like ensuring you pick a tool with a high base which ensures a complete cutting without touching the ground. This guide will help you choose the most effective tool that is comfortable for you.

171 Reviews

Real Amazon.com Customer Reviews, Want To Read Them?

#1: DEWALT DW872 14-Inch Multi-Cutter Saw

Dewalt has a multipurpose chopping saw with a model number DW872 made from the USA, which weighs 55 pounds.DW872 measures 24*15.2*18.5 inches. This item is usually black and yellow in color and doesn’t operate by battery.

This product is the best since it cuts about all metals and also wood and plastics. It has a carbide-tipped blade which makes the width of the cut to remain steady in a uniform direction till the time the blade will be used again. This saw blade has a length of 14 inches. This blade can make about 1200 cuts by using the abrasive blade.

This saw is considered to be the best since it produces the most accurate cuts that have no burring. Thus making it very easy and fast item to handle. It precedes other saws since it is about 4 times quicker than the band and chop saws, it is likely to be quicker by 2*2 inch, 1.25-inch angle iron.

This chopping saw by Dewalt possesses a lot of advantages over other saws, for instance, it is moderately cheaper as compared to abrasive wheel cutting, it has a strong 15 ampere, and a horsepower of 5.3 motors, it has the RPM of 1300 that has no load speed, etc.

This saw has an elevated fence with about 45 degrees to ensure accurate cutting, its guard is made in a way that it withdraws very fast to observe the cutting line, it has a chip deflector to protect chips.

Price

DEWALT Metal Cutting Saw, 14-Inch (DW872)

List Price: $462.08

Price: $461.16

You Save: $0.92

Price Disclaimer

Review Continues

SPEED

DW872 is the best metal chop saw that has 1300 No load RPM and known not to be the best speed in demand, it gives cuts that have no sparks, thus making it remain perfect during and after using it. It has 70 teeth that enhances smooth cutting and less tiresome while using it.

THE FENCE

This is where this item does a perfect work such that the other cut off saws cannot, it features a verticle clamp and pushes the load downwards using the rubber padding making the work look perfect.

GRIP

Dewalt does a great work when it comes to cutting secure grip, it has a fastener that makes a perpendicular clamping system with a quick lock design for the faster secure grip.it has a comfortable large crank and two rubber grips that make the objects tight for easier and smooth cutting.

EASY TO REPLACE THE WHEEL

It has a slider lock that makes wheel replacement very faster and doesn’t use a lot of effort. Dewalt DW872 has less changing moves. These saws are onboard wheel replacement wrench storage, a solid and a strong base, etc.

Pros Vs Cons

145 Reviews

Real Amazon.com Customer Reviews, Want To Read Them?

#2: Makita LC1230 12-Inch Metal Cutting Saw

Makita is a brand that is famous for producing quality industrial accessories and power tools. This chop saw has a model number as LC1230 and weighs 41.9 pounds .it is made of carbide, blue in color and products dimensions are 20.3 x 12.1 x 23.7. Makita LC1230t is a corded electric model with 1650 watts motor and requires 120 volts to operate, does not use the battery. Makita LC1230t has a no-load speed of 1300 rpm.

This product is ideal when cutting through tubes, metal pipes, making iron angles, conduits and also cutting channels finely compared to other abrasive cut-off saws.it has 15 ampere motor and power consumption of 120 volts. It is easy to grip with D-shaped handle. The long-lasting carbide material making this machine guarantees affordability performance. Moreover, despite wear and tear, this product can ensure an accuracy cutting for a long time.

Price

Makita LC1230 12" Metal Cutting Saw

List Price: $437.10

Price: $394.42

You Save: $42.68

Price Disclaimer

Review Continues

ACCURACY

Cold saws make cuts clean, unlike abrasive metal cutoff saws and it is less spark which means your workstations remains clean. There is little grinding needed after cutting which proves the product’s accuracy. The major advantage of cold saws like Makita LC1230 is that the metal remains cool even after cutting such that you can touch unhurt, this means you can proceed to the next welding stage without having to wait for the metal to cool.

POWER

What makes the product ideal cold metal saw under 400 is the quantity of power it preserves within itself. Makita LC1230 has the 15amp motor that rotates the blades at a lower but constant speed of 1300RMP, hence is most suitable saw for cutting thick metals. It comes with the retractable metal collector in additional, thereby leaving the station top clean. This also prevents the chips from interfering with the chop saw.

BLADE QUALITY

It is sold with a top quality blade made from carbide which offers long lasting service without a call for a replacement. Makita LC1230 has a socket wrench that is stored on the for quick blade changes. Doubled with 15ams motor and fast release vice, the blade gives you an accurate cutting with least blurs.

SAFETY AND EASE OF USE

Makita LC1230 is ideal saw that is easy to operate and proper safety measures. It characterized with lock-off button for the safety of the user. This feature controls unexpected or accidental startup, which is fatal and can cause bad injuries or even death may result. Moreover with 2 finger trigger, which has safety benefits too while in use.

Pro Vs Cons

Makes an accurate, straight and clean cut
It has a lock off and 2 finger baton which is great safety features
Best quality blade
Has a metal collector box that ensures clean working station by collecting chip bits
Made with fast release vice
Has a self-wrench storage
Very portable with head down hold chain

The Bad