How To Cut Glass
Easy as 1, 2, 3
Easy as 1, 2, 3
A lot of people try their luck at cutting glass but soon end up surrendering. Why is that? Quite a few of those adventure seekers go out and purchase glass for a specific task, and hope that they will succeed at their endeavor, however, they quickly give up due to not having enough knowledge about the job or the tools needed to execute it. In the case of setting a window sheet, making a re-colored glass mosaic, or doing some other undertaking, cutting glass is a helpful attitude that isn’t hard to get. With the correct devices and an unfaltering hand, anybody can begin cutting standard glass at home with ease.
For training, it is wise to get a glass of 3 or 4 mm thickness, which isn’t difficult to work with yet in addition not too thin to break effortlessly. 2mm is regular glass for picture outlines, however, it can be tricky for the first couple of minutes before you know exactly how much pressure you need to apply to cut the glass. 5 mm and thicker gets harder to break, and can take some mettle when it gets extremely thick. Anything above 8mm, you have to truly put pressure on the glass to tear it open which can be very difficult.
The wooden type of glass cutter is anything but difficult to discover, has cutting wheels, but there is no compartment for the oil. For the other cutters, there is a compartment for the oil which is fitted with an opening valve at the cutting head that usually opens up when put pressure on the shaper on the glass and lets out a consistent stream of oil as you make the cut. Majority of the glassworkers would have the two sorts within reach, however, as you begin it is better to go with the wooden one.
You need the glass to be completely straight and leveled with the surface, and have great help all around. Any bowing and strain in the glass will result in the cut to go”off track” and the lines will be jagged and your mission would remain unsuccessful. The best surface ought to be firm enough to make the cut easily.
Most glass works have little slack, and you need to gauge a long time before you make the cut. Unlike wood, you can’t simply sand down the glass.
Prepare you work bench properly to get it ready for the glass-cutting business. Prefer a work area that will not get any scratches. Avoid doing the job in an area where there might be a danger of stepping on the shards. This is why cutting glass on a house floor or a carpet is never a good idea.
Make sure the surface is properly cleaned before you start cutting.
Keep the tools handy, especially the glass cutter and the oil.
Make the necessary measurements where you endeavor to make the cut. You can use a marker for this purpose.
Dunk the shaper in the oil and then you have to handle it like a pencil. A well-oiled cutter makes a smoother scoreline. Make a point to take a gander at the haggle beyond any doubt it is arranged the manner in which you need the glass to cut.
Use a ruler to guide your cuts. Then, apply some pressure and gently drag it in a straight line. You should look for a smooth sound like ripping off silk. If you hear a screeching sound, it means that either you are applying too much pressure or you need to use more lubricant.
You need to make sure that you are dragging the cutter from one edge of the glass to the opposite edge. Do not make jagged lines in between.
You need a score that isn’t bursting and is hardly noticeable when you manage to wipe the oil away. It should resemble a little scratch, nothing more than that. Ensure it runs totally from one edge of the glass to the other end.
Hold the glass firmly in two hands. It is important to be careful in this step so that you do not injure yourself. Now, try to snap it like it was a wafer.
Use the light pressure of your wrist to break the glass along your score. Your elbows should not move. Basically, curve your wrists and turn your right wrist and your left wrist counterclockwise. Envision that the score you made is a large portion of the profundity of the glass surface and now you have to “open it up” by utilizing the score as a frail spot. You’re done when you have two bits of glass rather than just the one you began with.
Utilize a sandpaper or a specialized stone to expel the sharp edge. This edge will be the place the vertical edge meets the level surfaces. Not exclusively does sanding lessen the odds of you cutting yourself with the sharp glass, but the glass that is sanded is less inclined to chip along the edges and has some additional quality.
That’s it. You have successfully cut a glass all by yourself. Be careful to use the right equipment for the process to ensure that you do not incur any damage to the glass or injure yourself while cutting the glass.
All-Saws is an independent 3rd party product review blog. We conduct reviews in-depth product research to help readers save time, effort and avoid purchasing a lemon. You can also check out how we make money without adding any bias to our reviews.
For more information about what we do, take a look at a more detailed explanation.
Philippe Allaire and all-saws.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com.
Leave a Reply
Want to join the discussion?Feel free to contribute!